Hi Loves!
Christmas is already here! All the crazy shopping, wrapping gifts, Christmas lights everywhere, cold evenings by the fire! The best season of all! Today I'm sharing with you a set of Christmas cards that I made using the Carol of the Elves paper collection from Lexi Designs. I made two cards completely different yet very similar. One with Elves and one with Santa. Happy Holidays my Loves!
I have had the 3D room scene kit in my stash for a while and decided that the Carol of Elves papers would work perfectly with it - in addition to the kit with the co-ordinating shabby ribbon you will also need a sheet of 05, 03 and 01 along with the chipboard ladder with ornaments.
The eagle eyed will notice that I have placed my window to the back of the scene rather than the side so its upto you which you prefer as teh two pieces with slots in will fit in either direction. BEFORE making the chipboard room up if you want to cover the pieces with paper you decorate the one with the window first - starting with the side that is going to be faceing outside, this way you can cut out the paper for the window panes and also the slots for the window box. Then cover the inside avoiding gluing down at the end that has to but up to the second panel and then cut out just the window pane areas.
I constructed the ladder adding only two of the presents to the shelves and used off cuts of striped paper to decorate them. I took a cotton reel and covered it with more paper and then draped over a piece of lace to resembly a table cloth and then adhered a Christmas Tree on top of it before sitting it into the corner. I then added lace curtains to the windows. The ladder was then placed at an angle between the window and corner tree.
The standing elves were fussy cut out from paper. To allow them to stand I cut out the presents from one of the sheets and added a 1 to 2 cm score line - the bigger piece was adhere to the elves and the smaller one to the base of the box. I also added two more trees as I felt the dioramma needed something more.
My parcels were made by covering 2cm and 1cm wooden beads with decorative papers and then tied with red cotton twine. Before adhering these inplace along with the remaining parcel from the ladder kit I chose my sentiment (it acts like a rug) - there are no sentiments in the paper pack so I chose one that I felt worked well from the Christmas Vibes 12 x 12 papers.
To decorate the window box I used another sentiment from the Christmas Vibes collection and then tucked in holly leaves and added berries.
My next step was to decorate the box that goes into the base. BE CAREFUL it is not square and only fits in in one direction so identify this before adding the panel and draw pull to the box itself. Inside the box I have placed a this way that way album.
Essentially this is a concertina album tied at both sides so it opens one way when you untie one side and the other if you untie the other side. To constuct this I covered 13cm square pieces of greyboard with decorative papers. To make the pages I then cut stips of A4 card 5" high and scored at 5 and 10" leaving a short flap which was then used to attatch this piece to a second cut the same way. Finally a 5" high by 10" long piece of card scored at 5" was added. The first and last of these were then attatched to the inside of the album covers before decorating with decorative papers and white photomats. Before adding decorations to the album I took a piece of the shabby ribbon from the kit and divided it into 4 before attatching two pieces to the front and two to the back cover pieces securing them in place with decorative papers.
Hello, my dears!
I'm sure you've heard that phrase about beauty which can save the world. Sometimes I'm thinking that probably our world has gone too far to comply with that idea. However, there is nothing ever able to prevent us from creating and appreciating beauty at least in our closest surroundings.
Today I'm here with my new mini-album in vintage style. A minimalistic paper collection from Laserowe Love together with their chipboard inspired me to use more textures than colours. Different die-cuts and a little bit of sisal add depth even to the flattest layouts. Hope you like the result.
